Tubes & rectangular profiles
Square and rectangular sections (1×1, 1×2, 1×4, 2×4, 1¾×1¾). The structural base of windows, doors, enclosures and frames. Larger section and wall thickness mean more rigidity for wide openings.
← Back to profiles
Guide · Aluminum profiles
Best aluminum profiles for construction
A practical guide to choosing well: which type of aluminum profile to use by application, why the AA 6063-T5 alloy is the architectural standard, what finishes exist, and how to read the relationship between section and wall thickness. Built for projects in Santiago, Santo Domingo, Punta Cana and across the Dominican Republic.
Profile types by application
Extruded aluminum profiles group by geometry, and each family solves a different part of the job. Choosing starts by identifying what the piece has to do.
Angle profiles
Angles (¾×¾, 1×1, 2×2…) for frames, edge trims, corners, reinforcements and where two planes meet. They solve joints and edges a tube can't.
Round profiles
Round tubes in various diameters for handrails, railings, light structures and design. Good weight-to-strength ratio and a clean look.
Moldings & decorative profiles
Moldings, beads, cornices and cabinet leaf for finishes, aluminum furniture and detailing. A fine finish without adding structural weight.
Fascias & facade profiles
Fascias, louvers and slat screens to clad facades, control sun and ventilate. Designed for outdoor use and to repeat across large spans.
Material
Why AA 6063-T5
AA 6063 is the go-to architectural aluminum alloy. Its composition lets you extrude thin, well-detailed sections —key for window and facade profiles— with adequate mechanical strength and excellent corrosion resistance, decisive in the Caribbean coastal climate. The T5 temper is the heat treatment that gives it the stable working hardness a construction profile needs.
- ✓Extrudability
Allows thin geometries, fits and precise detail.
- ✓Corrosion resistance
Performs very well against salt air and humidity.
- ✓T5 temper
Stable working hardness for windows and facades.
How to choose the profile by use
The quick way to decide: use first, then section and wall thickness. Each application has an ALUCOM page where you can see the detail.
Windows & doors
Start from the system (P65, P92, C70, M100, Traditional, AA Windows, Commercial Doors) since it defines the profile. Check sash fit, weatherstripping and hardware, plus wall thickness for the opening size.
View profile catalog →Facades, louvers & slat screens
Look for fascias and facade profiles with enough inertia to span without flexing, and define fixing and ventilation. In coastal areas, mind the finish because of salt air.
Facade & louver profiles →Structures & enclosures
Combine rectangular tubes (frame) with angles (reinforcements and joints). Increase wall thickness before section when you need more rigidity in the same space.
Profile weight calculator →Cabinetry & furniture
Use cabinet leaf, moldings and light profiles. Aluminum won't rot or attract termites, and a wood-look finish adds warmth without the upkeep of real wood.
Wood-color profiles →Finishes
The finish protects the aluminum and sets the look. Outdoors and on the coast, protecting the coating film matters as much as the profile itself.
White & black
The most requested line finishes — stable and economical for windows and structure.
Powder coating
A hard, even color coat of your choice; good outdoor resistance.
Anodizing
A controlled oxide layer that protects the aluminum; metallic look and great durability.
Wood color / wood-look
Wood texture (oak, light wood, mahogany) that won't rot or need varnish — ideal for facades and warm details.
Want warmth without maintenance? See the wood-color aluminum profiles.
Table: application → recommended profile
A guiding starting point. The specific project (span, loads, system and finish) always rules; to size with numbers, lean on the weight calculator.
| Application | Recommended profile | Notes |
|---|---|---|
| Sliding window / door | System profile (P65, P92, C70, M100) | The system sets the section; check sash fit and hardware. |
| Ventilated facade / louver | Fascia + facade / louver profile | Prioritize inertia and fixing; durable finish on the coast. |
| Railing / handrail | Round or rectangular tube | Diameter/section per height and support spacing. |
| Structure / enclosure | Rectangular tube + angle | Increase wall thickness for more rigidity. |
| Cabinet / furniture | Cabinet leaf + moldings | Lightweight; optional wood-look finish. |
| Trim / corner / reinforcement | Angle | Solves joints and edges between planes. |
Profile weight calculator → · Made-to-order profiles (special sizes) →
Frequently asked
Aluminum profiles for construction — common questions
What is the best aluminum profile for construction?
There isn't a single one — it depends on the application. Windows and doors are ruled by the system (P65, P92, C70, M100…); facades use fascias and louvers; structures use rectangular tubes with angles. The practical rule is to choose by use, then tune section and wall thickness to the opening.
Why is the AA 6063-T5 alloy used?
AA 6063 is the go-to architectural aluminum alloy: good extrudability for thin, detailed sections, adequate strength for windows and facades, and excellent corrosion resistance. The T5 temper gives it the stable working hardness construction profiles need.
Which finish is best in coastal areas like Punta Cana or Puerto Plata?
In salt air you want a finish that protects the aluminum well: quality powder coating, anodizing, or a wood-look finish over a treated base. What matters is protecting the coating film and avoiding scratches that expose the metal.
How do I know what wall thickness I need?
The wider the opening and the higher the structural demand, the more wall thickness. As a rule of thumb, for the same space it's better to increase wall thickness before enlarging the section. To estimate weight and compare options, use ALUCOM's profile weight calculator.
Do you make custom aluminum profiles?
Yes. Beyond the stock catalog, ALUCOM designs new profiles and modifies existing ones to fit the project, made to order. Standard bars are 21 ft (6.40 m) and local production runs about 6–7 weeks.
Do you deliver across the Dominican Republic?
Yes. Based in Santiago, with delivery to Santo Domingo, Punta Cana, Puerto Plata and the whole country; for project volume, delivery by container.
From guide to project
ALUCOM distributes stock aluminum profiles and designs custom profiles for windows, facades, structures and cabinetry across the Dominican Republic. Tell us your application and we'll point you to the right profile.